Kobold Ebb100 Electric Brush - Vorwerk Kobold VB100 Manual De Instrucciones

6.2 Kobold EBB100 Electric
Brush
Fault
The Kobold electric brush is too loud.
The LED display on the cordless
vacuum cleaner lights up yellow.
40
Possible cause and rectification
The roller brushes may not be correctly inserted.
• Check whether the roller brushes are correctly inserted.
• Always replace both brushes together.
It may that original Kobold accessories were not used; this
can lead to bearing and motor damage.
• Use original Kobold roller brushes only.
An object may have become stuck in the area of the roller
brushes.
• Remove the object.
There may be loud noises when working on hard floors.
• Switch to 'normal' brush mode.
The suction duct of the electric brush may be blocked.
• Open the inspection flap
electric brush.
• Remove the blockage.
• If necessary, use an appropriate object to do this (e.g.
crochet needle).
• Put the inspection flap
on the underside of the
back on.