Sata Settings Screen Details - Dell PowerEdge T130 Manual Del Propietário

Option Description
Number of Cores Controls the number of enabled cores in each processor. This option is set to All
per Processor by default.
Processor 64-bit Specifies if the processor(s) support 64-bit extensions.
Support
Processor Core Displays the maximum core frequency of the processor.
Speed
Processor 1
The following settings are displayed for each processor installed in the system:
Option
Brand
Level 2 Cache
Level 3 Cache
Number of Cores

SATA Settings screen details

You can use the SATA Settings screen to view the SATA settings of SATA devices and enable RAID on
your system.
To view the SATA Settings screen, click System Setup Main Menu → System BIOS → SATA Settings.
The SATA Settings screen details are explained as follows:
Option Description
Embedded SATA Enables the embedded SATA option to be set to Off, AHCI, or RAID modes. This
option is set to AHCI by default.
Security Freeze Sends Security Freeze Lock command to the Embedded SATA drives during POST.
Lock This option is applicable only for AHCI mode.
Write Cache Enables or disables the command for Embedded SATA drives during POST.
Port A
For AHCI or RAID mode, BIOS support is always enabled.
Option
Model
Drive Type
Capacity
Port B
For AHCI or RAID mode, BIOS support is always enabled.
Option
Model
Description
Displays the brand name.
Displays the total L2 cache.
Displays the total L3 cache.
Displays the number of cores per processor.
Description
Displays the drive model of the selected device.
Displays the type of drive attached to the SATA port.
Displays the total capacity of the hard drive. This field is
undefined for removable media devices such as optical
drives.
Description
Displays the drive model of the selected device.
25