Processor Settings Screen Details - Dell PowerEdge T130 Manual Del Propietário

Option Description
System Memory Displays the system memory voltage.
Voltage
Video Memory Displays the amount of video memory.
System Memory Specifies whether the system memory tests are run during system boot. Options
Testing are Enabled and Disabled. This option is set to Disabled by default.
Memory Specifies the memory operating mode. The available option is Optimizer Mode.
Operating Mode

Processor Settings screen details

You can use the Processor Settings screen to view the processor settings, and perform specific functions
such as enabling virtualization technology, hardware prefetcher and logical processor idling.
To view the Processor Settings screen, click System Setup Main Menu → System BIOS → Processor
Settings.
The Processor Settings screen details are explained as follows:
Option Description
Logical Processor Enables or disables the logical processors and displays the number of logical
processors. If this option is set to Enabled, the BIOS displays all the logical
processors. If this option is set to Disabled, the BIOS displays only one logical
processor per core. This option is set to Enabled by default.
Virtualization Enables or disables the additional hardware capabilities provided for virtualization.
Technology This option is set to Enabled by default.
Adjacent Cache Optimizes the system for applications that require high utilization of sequential
Line Prefetch memory access. This option is set to Enabled by default. You can disable this
option for applications that require high utilization of random memory access.
Hardware Enables or disables the hardware prefetcher. This option is set to Enabled by
Prefetcher default.
DCU Streamer Enables or disables the Data Cache Unit (DCU) streamer prefetcher. This option is
Prefetcher set to Enabled by default.
DCU IP Prefetcher Enables or disables the Data Cache Unit (DCU) IP prefetcher. This option is set to
Enabled by default.
Configurable TDP Enables you to reconfigure the processor Thermal Design Power (TDP) levels
during POST based on the power and thermal delivery capabilities of the system.
TDP verifies the maximum heat the cooling system is required to dissipate. This
option is set to Nominal by default.
X2Apic Mode Enables or disables the X2Apic mode.
Dell Controlled Controls the turbo engagement. Enable this option only when System Profile is set
Turbo to Performance.
24
NOTA: This option is only available on certain stock keeping units (SKUs) of the
processors.
NOTA: Depending on the number of installed CPUs, there may be up to four
processor listings.