Tabla de contenido
English
CAUTION
This installation manual is for Sony dealers.
This manual shows the correct handling of
the projector wall mount and important
precautions necessary to prevent accidents.
Be sure to read this manual thoroughly and
to do the installation work safely. Keep this
manual available for future reference.
To Customers
Sufficient expertise is required for installing
this projector wall mount. Be sure to
subcontract the installation to Sony dealers
or licensed contractors and pay special
attention to safety during the installation.
To Sony dealers
Sufficient expertise is required for installing
this projector wall mount. Be sure to read
this manual thoroughly to do the installation
work. Sony is not liable for any damage or
accident, such as falling, etc., caused by
mishandling or improper installation. Please
give this manual to the customer after
installation.
This projector wall mount is for Sony
projectors. Do not mount any projectors
other than the recommended Sony
projectors.
Maximum load: 7 kg (15 lb)
On Safety
Important Safety Instructions
• For safety reasons, check the strength of the
wall before installation. If the wall is not
strong enough, reinforce it sufficiently
before installation.
• Be sure to assemble and attach the projector
wall mount in the order indicated. Otherwise
the projector may fall, and it may lead to
death or serious injury.
• When you attach the projector wall mount,
be sure to attach wires to prevent swinging
2
GB
when a vibration such as an earthquake
strikes.
• PSS-645 is a support kit for the Sony
projector wall mount. Do not use the
projector wall mount for purposes other than
for which it is designed.
• For installation, consult with the dealer of
your projector wall mount or qualified Sony
personnel.
• After the installation of projector wall mount
and projector, check that they are sufficiently
secure and safe to use. Ensure that the screws
are still tight every two months.
• Do not use the projector wall mount for
purposes other than for which it is designed.
Do not attach it to the ceiling, floor, or desk.
• Do not install the projector wall mount on a
wall subject to vibration or impact.
• Moving the installation location on your own
may lead to physical injury. Consult with the
dealer of your projector wall mount,
qualified Sony personnel, or qualified
service personnel.
• Only qualified service personnel (two or
more) should carry out installation or
dismounting of the projector from the
projector wall mount. If the projector is
dismounted when hot, serious injury or fire
may result from the product toppling over.
Be sure that the projector is not hot when
dismounting it from the projector wall
mount.
• To avoid fire or electric shock, do not install
the projector with the projector wall mount in
a humid or excessively dusty place.
• When dismounting the projector from the
projector wall mount, be sure to unplug the
AC power cord and other connecting cables
beforehand.
• If you disassemble or modify the projector
wall mount, it may lead to injury. Consult
with the dealer of your projector wall mount
or qualified Sony personnel for inspection or
repair.
• If the screws are not fastened securely, the
projector may fall and you may get injury.
• Do not perform installation work at an
unstable location. Otherwise you may
damage your back or the projector may fall,
and it may lead to serious injury.
Tabla de contenido
