Hold Function; Bass Control - Sharp MD-MT180H Manual De Manejo

Grabador/reproductor minidisc portátil
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Playback (continued)
MD-MT180H
ENGLISH


Bass control

Each time the BASS button is pressed, the tone will be
switched as follows.
BASS 1
Emphasised slightly.
BASS 2
Emphasised more.
BASS 3
Emphasised fully.
BASS OFF
Cancelled.
Notes:

You cannot change the bass setting whilst selecting
menus.

Reduce the volume before starting to play. MiniDiscs,
compared to ordinary cassette tapes, have very little
noise. If the volume is adjusted according to your
usual expectations of noise, high volume may damage
your hearing.

The sound escaping from your earphones may annoy
people around you. In particularly crowded places
(such as on trains or buses), reduce the volume.
E-15

Hold Function

The present operation condition can be kept even if other
buttons are accidentally pressed in a place such as a
crowded train.
Press the HOLD button for 2 seconds or more.
Hold
Release
If the battery is inserted or the AC adaptor is connected,
you can set this function even when the power is turned
off.
To cancel the hold mode
Press and hold down the HOLD button for 2 seconds or
more whilst the unit is in the hold mode.
"HOLD OFF" will be shown.
If the hold function is active whilst the power is turned
off, the power cannot be turned on by mistake and the
battery will not be drained.
01/10/11
180H_E_3.fm
Tabla de contenido
loading

Tabla de contenido