Tabla de contenido
Idiomas disponibles
Idiomas disponibles
cod. 97845
Warning!
Please make sure the cutting head has been assembled correctly before use!
..,
.
.,papillon·
Note: The packaging material Is made of recycle materials. Dispose of packaging materials In
accordance with regulations.
8.
Fit the belt. According to picture showing, fit the belt well.
OPERATION
When operating this machine, please follow the instructions for operation steps.
5.
Filling with fuel
D1111ger
of
Injury!
Fuel
la explosive!
-
- Tum
off
and
cool the motor down before ftlllng the
tank
with
fuel.
- You must observe
all
safety Instructions relating
to
handing fuel.
Risk of device clamagel
ATTEllTICINI
Before operating, you must
flll
It
with
fuel.
Never use oil for 4-cycle engine use or water cooled 2-cycle engine. If can cause spark plug fouling
exhaust port blocking or piston ring sticking. The oil to use is that for the 2-cycle air cooled engine.
Mixed fuels, which have been left unused for a period of one month or more may clog the carburetor or
result in the engine failing to operate properly. Put remaining fuel into an airtight container and keep it in
a dark and cool room.
Mix a regular grade gasoline (leaded or unleaded, alcohol-free) and a quality-proven
motor oil for air-cooled 2 cycle engines.
RECOMMENDED MIXING RATIO
GASOLINE 40: OIL 1
ATTENTION: use only 100% SYNTHETIC OIL when preparing the fuel mix.
Warning I Take care of the emission of exhaust gases.
Always shut off engine before fueling. Never add fuel to a machine with a running or
hot engine. Take care of fire!
35
Tabla de contenido
