Commissioning; Connect Pc To The Same Network With Hmi Board - VESTEL EVC04 Serie Guia De Instalacion

12- Insert the RJ45 connector to the socket as shown in figure below.

4 - COMMISSIONING

You must connect your PC to the charging station to use functions and make configurations
below:
• Login
• Change Password
• Main Page
• General Settings : Display Language
• Ocpp Settings : Ocpp Connection,OCPP Version,Connection Settings,Ocpp Configuration
Parameters
• Network Interface Settings:Cellular,Ethernet,Wi-Fi
• Standalone mode settings
• System Maintanence:
• Log Files,Firmware Updates,Configuration BackUp&Restore,System Reset,Administration
Password,Factory Default Configuration

4.1 - CONNECT PC TO THE SAME NETWORK WITH HMI BOARD

In order to access Web Config UI, first you need to connect your PC and EV charger to the same
ethernet switch or connect EV charger to your PC directly.
IG v7.3.0 2020
Table-15
Figure.32
© 2020 Vestel - All rights reserved
CN13
English - 38