Punktal PK-292LIC Manual De Operación página 13

ACCESSORY DRY GRINDING CUP
INSTRUCTIONS
Cup lid
Dry sharpening Knife
Dry grinding cup
Upper clutch
1. Place the main unit on a at, dry workbench,
make sure that the switch knob is set to "0" before
turning on the power (see Figure 1), and plug in a
power source that meets the requirements on the
main unit's nameplate.
2. Clean the dry grinding cup to ensure that there
are no other debris in the cup. Put the beans or
nuts to be processed into the cup (see Figure 2)
Then screw the cup cover clockwise into the cup
body (see Figure 3/4). Take care not to exceed the
maximum capacity of the cup. 200 grams of
soybeans for stiring 30 seconds.
3. After inserting the lower shaft of the dry grinding
cup to vertically align the output shaft of the motor
base to the host, hold the cup handle to rotate the
cup clockwise, and snap the cup into the lock on
the host to con rm the installation (at this time
The stirring cup holder will press the safety ejector
lever on the host and touch the safety switch in
the host) (see Figure 5).
13