Rollei CarDVR-70 Manual Del Usuario página 2

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12
USB output
AV output
REC Key/ OK Key
Mode Key
HDMI output
Speaker
Installation
For the power capacity in the battery, refer to the following icons:
Full
Middle
Charge Battery
1. Directly connect the car charger to the DVR for charging, even if it is switched off.
2. For USB charging, connect the USB data cable to the PC with the other end to the DVR,
even if it is switched off.
Installation and Removal of SD Card
1. In the direction as indicated, insert the TF card into the slot until it is held firmly.
2. To take the TF card out, slightly press the TF card to eject it out.
Note:
1. Observe the direction to insert the TF card; if the direction is reverse, the device and the
TF card may be damaged.
Low
On/Off Key/ Fill light
Snapshoot
Up Key/FB/Volume+
Down
TF card slot
Reset hole
Lens
IR
loading