Blumfeldt Andora Flame Manual Del Usuario página 25

EN
Caution! Please do not forcefully turn the control knob, the button should be
pushed down before changing the heat control settings. The control button
will not turn without pushing downwards. Ensure the button is locked into
the heat setting /position required. Do not continuously hold down the
control knob as you may cause a build up of gas. In case the burner is off
during working, you must wait 5 minutes before trying to turn on the stove
again.
Turn off heater
Turn off heater at cylinder or turn the switch on the regulator to the "OFF"
position. If the heater is not be used for a period of time disconnect the
regulator from the cylinder and replace any value protection plug or cover.
25