Inverter Manager - SMA DIGITAL I/O BOX Manual De Instalación

Ocultar thumbs Ver también para DIGITAL I/O BOX:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

3  Inverter Manager
The LCS tool is required for commissioning and servicing
STP 60 inverters via the SMA Inverter Manager. The LCS
tool acts as the primary user interface of the STP 60 system.
Use this product only in accordance with the information
provided in the enclosed documentation and with the
locally applicable standards and directives. Any other
application may cause personal injury or property damage.
For safety reasons, it is not permitted to modify the product
or install components that are not explicitly recommended
or distributed by SMA for the product. Unauthorized
changes and modifications will void all warranty claims and
the operating permission. Any use of the product other than
that described in the Intended Use section does not qualify
as the intended use.
The type label must remain permanently attached to the
product. The enclosed documentation is an integral part of
this product.

3 Inverter Manager

3.1 Scope of Delivery
Check the scope of delivery of each product for
completeness and any externally visible damage. Contact
your distributor if the scope of delivery is incomplete or
damaged.
A
S M A
IN V E
R T E R
M A N
A G E
R
Figure 1: Components included in the scope of delivery of the
Inverter Manager
Position Quantity Designation
A
1
B
2
C
1
D
1
E
1
F
2
2
IMVIOBOX-IA-xx-11
B
C
G
E
F
Inverter Manager
Wall mounting bracket
Bracket for mounting on top-hat
rail (35 mm DIN rail)
Connection for electricity supply
Connecting terminal plate for
electricity supply
Bootlace ferrules
SMA Solar Technology AG / SMA Solar Technology America LLC
Position Quantity Designation
G
H
3.2 Mounting the
Inverter Manager
Damage to the products and cables due to moisture
The Inverter Manager and the I/O Box are not protected
against splash water. Consequently, moisture can
penetrate the device and damage the products and
cables.
• The Inverter Manager and the I/O Box must be
installed in a dry environment, e.g. indoors or in a
splash-proof enclosure (degree of protection: at least
IP54 (NEMA 3R)).
3.2.1 Option 1: Wall Mounting
1
D
2
H
2
Screw for wall mounting
1
Installation manual
S M A
IN V E
R T E R
M A N
A G E
R
Installation Manual
Tabla de contenido
loading

Este manual también es adecuado para:

Lcs tool

Tabla de contenido