Tabla de contenido
Idiomas disponibles
Idiomas disponibles
4. Install the Bathroom Sink
CAUTION: Risk of personal injury. Vitreous china sinks are
very heavy. Get help lifting and aligning the sink.
Install the faucet and drain to the sink. Refer to the faucet and
drain manufacturer's installation instructions.
NOTICE: Siliconized acrylic caulk must be used to secure the sink
to the vanity. Do not use 100% silicone sealant, which will damage
the vanity finish.
Apply a 1/4" (6 mm) continuous bead of siliconized acrylic caulk
around the top of the vanity, as illustrated.
NOTE: The sink is properly positioned when the back edge of the
sink is flush against the finished wall, and the overhang on the left,
right, and front of the sink is the same.
With assistance, lift and properly position the sink on top of the
vanity.
Immediately wipe away any excess caulk that contacts the vanity.
Apply a 1/8" (3 mm) bead of siliconized acrylic caulk along the
top edge of the sink where the sink contacts the finished wall.
Kohler Co.
7
1304474-2-A
Tabla de contenido
