Tools And Materials; Before You Begin - Kohler Vanity K-20195 Guía De Instalación Y Cuidado

Tools and Materials

Siliconized Acrylic
Caulk

Before You Begin

CAUTION: Risk of property damage. Select 250 lb (113.4
kg) load bearing 5/16" lag bolts with a length to clear
obstacles in the wall and 5/16" washers. Calculate proper lag
bolt length by adding the following: 1-1/2" (38 mm) backing
material + wallboard thickness + back rail thickness.
IMPORTANT! Risk of property damage. Use care when moving
the cabinet to avoid impacting, sliding, or side-loading the legs.
IMPORTANT! Risk of product damage. Do not modify the vanity.
Doing so will compromise structural stability.
NOTICE: Siliconized acrylic caulk must be used to secure the
bathroom sink to the vanity. Do not use 100% silicone sealant which
will damage the finish of the vanity.
NOTICE: To avoid the risk of product damage, the finished wall
must be straight and plumb. If the finished wall is not straight and
plumb, the vanity will not be properly supported and will cause
misalignment of the sink and door.
Observe all local plumbing and building codes.
Provide 2x6 backing material behind the finished wall to properly
support the vanity.
1304474-2-A
Plus:
• 5/16" Lag Bolts and Washers
• Pad
• 2x6s
• Common Plumbing and Woodworking
Tools and Materials
2 Kohler Co.