Work WPA 6600 Instrucciones De Usuario página 6

EN
5. APPLICATION
This section introduces some typical applications of your WORK WPA 6600 , 6-Channel Headphone Amplifier, reserve
your time to well understand the control elements ( see Chapter 3 ) a nd the following application examples, so as to
be able to fully exploit the WPA 6600 6-Channel Headphone Amplifier.
5.1 Use the WPA 6600 as a Headphone Amplifier
This is the basic application for WPA 6600 6-Channel Headphone Amplifier.
While using the WPA 6600 as a Headphone Amplifier, please apply the program source to Main / Direct In Inputs, and
connect the headphone cable to one of the appropriate outputs. Ensure the Balanced Control adjusted to the complete
counter-clockwise position, and turn up the Input Gain control. The Input Gain control is used to boost or attenuate
the general volume of all the headphones, while the individual Output Gain controls are used to set the desired
channel volume.
Three headphones can be connected per channel each time, but, please be sure that the resulted connection impe-
dance must over 100ohms, otherwise, the output amplified signal may sound a little offensive, in terms of long time
fault condition usage, the headphone amplifiers will be finally damaged or distorted.
If you still need further headphone ports or more groups headphone amplifier, please interlink any number of WPA 6600
via the Main outputs.
In parallel with the Headphone Output on the rear panel, the Headphone Output on the front panel is also used to
output the signal of the individual channel, such function proves to be very useful esp. in the rack mounting application.
Headphone output1
5.2 Use the WPA 6600 as independent power amplifiers
Instead of using the WPA 6600 as the Headphone Amplifier, in many particular circumstances, it can also be conducted
as the independent power amplifiers, as for this kind of application, please turn the Balanced Control to complete
clockwise.
By setting the Balanced Control to AUX position, the Main signal will then be muted, only the signals coming
from Aux In Input can be routed to the headphone amplifiers circuit. So, now, you can apply up to six indepen-
dent stereo program sources to the mixing console, and consequently, six different and individual monitor facilities
for up to six musicians can be created.
Headphone output2
Headphone output3
program source
5
Headphone output4
Headphone output5
User Manual/Manual de Uso
Headphone output6
WPA 6600