Rear Panel - Work WPA 6600 Instrucciones De Usuario

EN
1. Direct In Input
The Direct In Input is used to feed the external program sources into the main signal path, comparing to the
Main Input on the rear panel, this input presents the priority character.
2. Input Gain Control
This control sets the input signal level coming from Main In.
3. Input Level Meter
This meter tells you the level of the main input signal coming from Main/Direct In, and the range goes from
-24dBu to +18dBu.
4. Aux In Input
The Aux In Input is used to feed the further input signal, which can be mixed with the Main/ Direct In signal via
Balanced Control.
5. L Mute Switch
The Left input signal will be muted if this switch is activated.
6. R Mute Switch
The Right input signal will be muted if this switch is activated.
7. Mode Switch
This push-button switches the operational mode between Mono and Stereo. Press this button for Mono appli-
cation, and the Mono LED (8) lights up.
8. Mono LED
This LED informs you the current operational mode. Press the Mode Switch (7) for Mono application, this LED
lights up.
9. Headphone Out Output
In parallel with the Headphone Output on the rear panel, this 1/4" TRS phone jack is also used to output the
signal of the individual channel.
10. Balanced Control
This control is used to set the proportion between the signal coming from Aux In Input and Main/Direct In Input.
11. Output Gain Control
This control is used to adjust the output level of the individual channel.
12. Output Level Meter
This 4-digit meter tells you the level of the output signal, and the range goes from -24dBu to +12dBu. In case
of the Clip LED lights up, please turn down the Input Gain Control or/and the individual Output Gain Control
to avoid any distortion.

3.2 Rear Panel

Use only with a 250V fuse Use only with a 250V fuse Use only with a 250V fuse
14
13
22 21 20 19
3
18 17 16
User Manual/Manual de Uso
15
WPA 6600