Work WPA 6600 Instrucciones De Usuario página 5

13. Fuse holder
Use the correct fuse according to the voltage value
14. AC Inlet
After the correct voltage has been set you can connect the AC plug to the unit and in the AC power socket.
15. Main Input Connectors
These connectors are used to input the stereo signal. You can input the main signal via the balanced 1/4" TRS
phone jack or XLR connector.
16. Main Output Connectors
These connectors are used to output the stereo signal. You can output the main signal via the balanced 1/4"
TRS phone jack or XLR connector. In some typical field, you can also use these connectors to interlink several
Headphone Amplifiers for more groups monitor.
17. Headphone Out1
In Parallel with the Headphone Out on the front panel (for CH 1), these are the headphone outputs of Channel 1.
18. Headphone Out2
In Parallel with the Headphone Out on the front panel (for CHl 2), these are the headphone outputs of Channel 2.
19. Headphone Out3
In Parallel with the Headphone Out on the front panel (for CH 3), these are the headphone outputs of Channel 3.
20. Headphone Out4
In Parallel with the Headphone Out on the front panel (for CH 4), these are the headphone outputs of Channel 4.
21. Headphone Out5
In Parallel with the Headphone Out on the front panel (for CH 5), these are the headphone outputs of Channel 5.
22. Headphone Out6
In Parallel with the Headphone Out on the front panel (for CH 6), these are the headphone outputs of Channel 6.
3.3 Lateral Panel
23. Voltage Selector
You must be sure of the Voltage available in your Country because this is a Dual Voltage Unit. Voltage operation
can be changed through this selector.
23
4
User Manual/Manual de Uso
EN
WPA 6600