NOTE: This appliance has a polarized plug (one blade is wider than
the other). To reduce the risk of shock, this plug is intended to fit only
one way in a polarized outlet. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician.
DO NOT attempt to defeat this safety feature. To do so could result in
an electric shock hazard.
Control Panel
Power ON/OFF Control
Clean/Reset Filter Indicator Button
CLEAN FILTER
Fan Speed Selection (Low/Medium/High)
NOTE: The Clean/Reset Filter Indicator MUST be pressed to reset the
indicator after you have cleaned and replaced the filter.
1
2
3
6
Operating Instructions
Turning the Unit On
• Take the air cleaner out of the box and remove the clear protective plastic bag.
• Place the air cleaner on a firm level surface.
• Before turning the air cleaner ON, you need to check that the True HEPA filter is
firmly in place and did not become loose during shipping. You may also choose
to install the optional odor reducing pre-filter.
Fig. 1
Fig. 2
Fig. 3
1. To check the True HEPA filter, open
the front grill by pulling on the tabs
on either side of the top of the grill
cover. Fig. 1
2. Open the cover outward until the tabs
at the bottom of the grill cover easily
slide away from the unit. Fig. 2
3. The True HEPA filter will be resting
inside the unit. Make sure that the
filter is firmly seated inside of the unit.
Fig. 3
7