Control Panel - HoMedics AT-45 Manual De Instrucciones E Información De Garantía

NOTE: This appliance has a polarized plug (one blade is wider than
the other). To reduce the risk of shock, this plug is intended to fit only
one way in a polarized outlet. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician.
DO NOT attempt to defeat this safety feature. To do so could result in
an electric shock hazard.

Control Panel

Clean Filter
Reset
Fan Speed
UV-C On/Off
Power On/Off
UV-C Bulb Reset
Timer
Oscillation
On/Off
6
Operating Instructions
Turning the Unit On
• Take the air cleaner out of the box and remove the clear protective plastic bag.
• Place the air cleaner on a firm level surface.
• Before turning the air cleaner ON, you need to confirm that the filters are firmly in
place and did not become loose during shipping.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
NOTE: Unit will not operate unless filters and grill cover are properly installed.
1. To check filters, open the rear cover
by gently pushing down on the release
tab on the top of the rear grill cover. Fig. 1
2. Open the grill cover outward until
the tabs at the bottom of the grill cover
easily slide away from the unit. Fig. 2
3. The True HEPA filters will be resting
inside the unit. Make sure the filters are
firmly seated inside of the unit. Fig. 3
4. Place the tabs at the bottom of the
grill cover into the base of the unit.
Gently push the grill cover back into
place until you hear a click sound
indicating that the grill cover is firmly
latched. Fig. 4
Connect the power cord into a
standard AC outlet.
7