Troubleshooting Guide - Craftsman CMED731 Manual De Instructiones

English
For assistance with your product, visit our website at www.craftsman.com for a list of service centers, or call CRAFTSMAN
at 1-888-331-4569.
PROBlEM
Unit will not start.
CHUCK CAPACITY
R.P.M.
BITS, METAL DRILLING
WOOD, FLAT BORING
8

TROUBLESHOOTING GUIDE

BE sURE TO FOllOW sAFETY RUlEs AnD insTRUCTiOns
CAUsE
Cord not plugged in.
Circuit fuse is blown.
Circuit breaker is tripped.
Cord or switch is damaged.
MAXIMUM RECOMMENDED CAPACITIES
CORRECTiOn
Plug tool into a working outlet.
Replace circuit fuse. (If the product repeatedly causes the circuit fuse
to blow, discontinue use immediately and have it serviced at an
authorized servicer.)
Reset circuit breaker. (If the product repeatedly causes the circuit
fuse to blow, discontinue use immediately and have it serviced at an
authorized servicer.)
Have cord or switch replaced at an authorized service center.
3/8"
0–2500
1/2" (13 mm) low speed
1-1/4" (32 mm)