Mainteinance; Cleaning And Disinfection; Cleaning; Disinfection - Mopedia ARKIMED RI700C Manual De Instrucciones

12
Low battery capacity
Recharge or replace the
battery

13. MAINTEINANCE

The MOPEDIA devices by MORETTI are checked carefully and supplied with EC mark, once
launched on the market. For patient and physician's safety we recommend to let check the
device by the manufacturer or by laboratory authorized every 2 years. In case of repair, use
only original spare parts and accessories.
• It is extremely important to check the patient lift before each use. More specifically, please
check that all screws and bolts are well tightened.
• Please, check the patient lift can move freely with the wheels unlocked by the brakes.
• Check the rear wheel brakes function correctly.
• It is very important to regularly check the connection pins and stop rings are correctly
located (the pins connect the actuator to the upper and lower part of the lift, and the
lifting beam where you hook the cradle).
• The mechanical parts must be lubricated with a drop of oil in order to facilitate their sliding
and resistance to wear. In particular, pay attention to the mechanical retractor for the legs
of the patient lift. Lubricate as indicated above every two or three months.

14. CLEANING AND DISINFECTION

14.1 Cleaning

To clean the cradle and the structure use a damp cloth with solution of alcohol or neutral soap
(in equal parts) mixed with water.
WARNING!
Do not use abrasive substances, acids, alcohol, chlorine-based cleaners, disinfectants
and acetone when cleaning, because these substances cause the abrasion of the
plastic surfaces and rusting of metal surfaces.
The manufacturing company cannot be held responsible for the damage that is caused by
using materials that could damage the product surface or corrosive chemicals during cleaning.

14.2 Disinfection

If you need to disinfect the product use a common disinfectant neutral detergent.

15. SPARE PARTS

For spare parts and accessories, please always refer to the MORETTI master catalogue.
Excess load alarm
The load lifted by the
patient lift exceeds the
maximum level allowed.
Remove the load and try
again.