AFTER EACH USE
•
To clean the precision and arc detail trimmers attachments:
•
Brush the accumulated hair from the cutting assembly.
TO CLEAN THE MINISCREEN FOIL
•
Hold the trimmer in one hand, with the other press the foil release buttons and gently
pull the foil assembly off the trimmer.
•
Blow any loose debris from the foil.
•
Brush or rinse the accumulated hair from the cutter assembly.
•
To replace the foil assembly, hold either side of the foil and push down until you hear a
click and it is firmly attached. Do not press down on the foil.
•
Rinsing the groomer under water or using when in the shower may require lubricating
the cutter blades periodically.
CAUTION
•
Only use the light-grade oil or sewing machine oil on the blades.
•
Do not use harsh or corrosive cleaners on the units or their cutters.
•
Do not apply pressure or hard objects to cutters.
•
Do not disassemble cutter assembly.
•
Do not submerge in water as damage will occur.
BATTERY REMOVAL
•
The battery must be removed from the appliance before it is scrapped.
•
The appliance must be disconnected from the supply mains when removing the battery.
•
To remove the rechargeable battery:
•
Unplug the trimmer.
•
Run the trimmer until the motor stops.
•
Open the handle by placing a flat head screwdriver between the handle and hang hook.
•
Gently pry apart the hang hook from the handle.
•
Gently pull out the inner bracket of the battery.
•
Cut the connect plates of the battery and take out the battery.
•
The battery is to be disposed of safely.
RECYCLING
W
To avoid environmental and health problems due to hazardous
substances, appliances and rechargeable and non-rechargeable
batteries marked with one of these symbols must not be disposed of
with unsorted municipal waste. Always dispose of electrical and
electronic products and, where applicable, rechargeable and
non-rechargeable batteries, at an appropriate official recycling/
collection point.
ENGLISH
GB
DE
NL
FR
ES
IT
DK
SE
NO
FI
PT
SK
CZ
PL
HU
RU
TR
RO
GR
SI
HR
UA
BG
AE
7