Fanimation FP1280 Serie Manual De Instrucciones página 9

How to Hang and Wire Your Ceiling Fan (continued)
If you feel that you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician.
WARNING
To avoid possible electrical shock, be sure electricity is
turned off at the main fuse box before wiring.
NOTE: If you are not sure if the outlet box is grounded,
contact a licensed electrician for advice, as it must be
grounded for safe operation.
4. Connect the green grounding lead from the fan motor
to the supply grounding conductor (this may be a bare
wire or wire with green colored insulation). Securely
connect wires with wire connectors supplied. Securely
connect the white fan motor wire to the white supply
(neutral) wire using wire connector supplied.
Securely connect the black fan motor wire wire to the
black supply wire using wire connector supplied.
The red wire from supply with a connector (not included).
(Figure 3)
5. Mount retainer to outlet box with screws (provided
with your outlet box). (Figure 4)
6.
canopy. Re-tighten strain relief.
7. Cut and strip lead wires.
8. After connections have been made, turn leads upward
and carefully push leads into the outlet box, with the white
and green leads on one side of the outlet box and the
black lead on the other side of the outlet box. (Figure 5)
9. After the connections have been made, tighten the lag
bolts to secure fan base assembly to the ceiling, making
sure that the electrical wires are completely inside the
base assembly and not pinched between the base and
the ceiling.
WARNING
Check to see that all connections are tight. To avoid
possible electrical shock, make sure that the electrical
wires are completely inside the base housing and not
pinched between the base and the ceiling.
10. If the motor pulley is loose, please tighten the set
screws only. Do not try to adjust the motor pulley's location.
(Figure 5)
GREEN
BLACK
WHITE
HARDWARE USED:
WIRE
CONNECTORS
Outlet Box
Strain Relief
Retainer
Canopy
Retaining
Nut
Ceiling Joist
Ceiling
Plywood
Base
Motor
Housing
9
GREEN
BLACK
WHITE
GROUND
AC POWER
Figure 3
x 3
Figure 4
Outlet
Box
2˝ Lag Bolt &
Flatwasher
(4 places)
Set Screws (2)
Figure 5