Uline TILTWATCH XTR Instrucciones

S-5571
TILTWATCH XTR
®
INDICATORS
The Tiltwatch XTR arms automatically by simply peeling off
®
the adhesive liner. Once Tiltwatch
not tilt left or right. Affix to carton immediately. Activates
at 80°. Most containers fall over when tipped 50°.
HOW TO USE:
• Simply peel off the adhesive liner and stick on
outside of shipment in a visible area. Placing in a
corner helps ensure it is upright.
• Press firmly in center and around edges of Tiltwatch
XTR to make sure adhesive makes good contact
with container.
• Rough wood or heavily waxed containers may
require spray adhesive to increase bonding strength.
Small screws, nails or staples may be used as well.
NOTE: Companion labels must be purchased
separately (S-7932). These are for the outer
box to alert handlers that package is being
monitored.
NOTE: Alert stickers are included. Place on BOL
as a reminder for customers to check Tiltwatch
XTR monitor upon arrival.
PAGE 1 OF 3
1-800-295-5510
uline.com
INSTRUCTIONS
XTR is activated, do
®
®
®
Arrow on label
becomes red when
tipped past 80°.
PHYSICAL CHARACTERISTIC SPECIFICATIONS
Activation Angle
Monitoring Range Single Plane
Adhesive 2 Mil High Tack Acrylic
Humidity Tolerance 5% to 99% Non-condensing
Temperature Tolerance 40 to 140°F/-40 to 60°C
Rigid polystyrene housing with stainless
Composition
steel indicator
Arming Arms with removal of adhesive liner
Size 2.65" length x 2.93" wide; 0.2" depth
Pressure sensitive adhesive and/or holes
Installation to accommodate small screws, nails or
staple for rough wood surfaces
Private logos available on orders above
Customization
3,500 units
Adhesive Shelf Life 24 months
Para Español, vea página 2.
Pour le français, consulter la page 3.
XTR
IF RED
INSPECT CONTENTS.
TIPPING HAS OCCURRED.
1-800-295-5510
80° +/-5% from vertical
0421 IS-5571