1. Manuales
  2. Marcas
  3. Uline Manuales
  4. Instrumentos de Medición
  5. H-2783
  6. Guia de inicio rapido

Uline H-2783 Guia De Inicio Rapido

Ocultar thumbs
1
2
3
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

H-2783
MAHR DIAL
THICKNESS GAUGE
IMPORTANT! Read these instructions completely
and carefully before using gauge.
CAUTION! All thickness gauges maintain
precise anvil parallelism throughout their entire
range. Disassembly of the anvils, removal of
the indicator and interchanging parts with
other gauges will destroy the parallelism.
Repairs and replacement of these parts should
be done only by qualified personnel. Contact
Uline Customer Service for assistance.
NOTE: Periodic verification of zero should be
performed to determine that the gauge setting
has been maintained.
NOTE: If zero needs to be reset, repeat Steps 1
and 2.
PAGE 1 OF 3
1-800-295-5510
uline.com
PREPARATION
1. Clean measuring surfaces.
2. With contacts together, zero the gauge.
3. Lift presser foot by pressing down on lift lever.
4. Place part under presser foot.
5. Release lift lever slowly.
6. Read indicator.
Pour le français, consulter les page 3.
a. Dial indicator setting:
• Loosen bezel clamp.
• Rotate bezel to line zero on dial
with indicator hand.
• Tighten bezel clamp.
b. Digital indicator Setting:
• Press the zero button.
Para Español, vea página 2.
0421 IH-2783
loading

Manuales relacionados para Uline H-2783

Resumen de contenidos para Uline H-2783

  • Página 1 • Tighten bezel clamp. be done only by qualified personnel. Contact b. Digital indicator Setting: Uline Customer Service for assistance. • Press the zero button. NOTE: Periodic verification of zero should be 3. Lift presser foot by pressing down on lift lever.
  • Página 2 • Apriete la abrazadera del bisel. deben ser reparadas o remplazadas por b. Configuración del indicador digital: personal calificado. Comuníquese con Servicio a Clientes de Uline para obtener • Presione el botón de cero. asistencia. 3. Levante el pie opresor presionando la palanca de levantamiento.
  • Página 3 Réglage de l'indicateur numérique : Communiquez avec le service à la clientèle de Uline pour de l'assistance. • Appuyez sur la touche « Zero ». 3. Appuyez sur le levier de levage afin d'écarter les REMARQUE : Une vérification du zéro doit être touches.