Cleaning The Water Tank; Cleaning The Coffee Grounds Drawer; Cleaning The Capsule Loading Tray; Rinsing Of The Internal Circuits - LAVAZZA BLUE LB2300 Instrucciones Para El Uso

Use of the machine - User Manual
6.2

Cleaning the water tank

The water tank should be cleaned every time it is
fi lled.
6.3 Cleaning the coffee grounds
drawer
The coffee grounds drawer must be emptied and
cleaned whenever indicated by the machine. To carry
out this operation, consult section 4.8.
In any event, whenever maintenance of the machine is
carried out, it is a good idea to remove and clean the
coffee grounds drawer.
At this time, it is also advisable to clean the grill for cups
and large mugs.
Check that the cup rest (A) can be lifted freely, without
resistance.
6.4 Cleaning the capsule loading
tray
Check the state of the capsule loading tray, and if nec-
essary clean it with a dampened cloth.
Warning. Do not use detergents to clean
the tray, as residues could be difficult to
remove.
Check that the tray slides without resistance.
6.5

Rinsing of the internal circuits

The internal circuits should be rinsed at least once
daily.
In order to perform this operation, consult section 4.5.
• 28 •
6.6 Cleaning the steam/hot water
wand
Check the state of the steam wand (3) and clean it with
a damp cloth.
For more thorough cleaning of the steam wand, remove
the extremity.
To remove the extremity of the steam wand, loosen the
A
upper nut (B) without removing it.
To remove the extremity of the steam wand, pull it
downwards rotating slightly.
Wash the extremity with lukewarm water. Make sure
no dirt is left inside.
7

USER MENU

To activate this function, press button (17) on the key-
pad.
This menu allows the user to perform the following
operations:
1 Descale the machine (when requested)
2 Activate/Deactivate Standby (to activate energy
saving)
3 Activate/Deactivate the cup-warming surface (in
models which support this function) located at the
top of the machine (to keep cups constantly warm)
4 Brew unit washing (when requested)
When button (17) is pressed, the other buttons take on
a different function:
15 ENTER/Confi rm Button
Pressing this button selects the function or confi rms
the command.
19 Page UP Button
Pressing this button changes the function or para-
meter.
21 Button C/Exit
Pressing this button exits the function.
22 Page DOWN Button
Pressing this button changes the function or para-
meter.
B
7.1

Display language selection

In all the machines, the message display language can
be changed from the special menu.
Lavazza
Ready
Insert capsule
On the main page, press button (17) to enter program-
ming mode. The fi rst displayed menu concerns langua-
ge selection.
The display shows the current language, for example:
1.
Language
To change the language, press (15). The display
shows:
1.
Language
At this point, it is possible to select the language.
Press button (22) to display the available languages,
for example:
1.
Lingua
Italiano
Press button (15) to confi rm.
Exit as described in section 7.7.
7.2 Cup-warming surface
(only models equipped with it)
The user can decide (in models where this function is
available) to activate the cup-warming surface located
at the top of the machine.
This allows cups to be warmed for full enjoyment of
the coffee.
Important. Do not warm cups made of plas-
tic. Do not touch the cup-warming surface:
danger of scalding.
English
English
^
^