Cleaning And Maintenance - Mobicool ML30 Instrucciones De Uso

ML30, ML40
Replacing the interior light
➤ Disconnect the device from the mains.
➤ Open the transparent cover using a screwdriver.
➤ Loosen the mounting screws of the circuit board.
➤ Pull the plug out of the circuit board.
➤ Replace the faulty circuit board with a new one.
➤ Reinstall the circuit board and the transparent cover.
8

Cleaning and maintenance

!
WARNING!
Always disconnect the device from the mains before you clean
and service it.
A
NOTICE! Risk of damage
 Never clean the cooler under running water or in dish water.
 Do not use abrasive cleaning agents or hard objects during
cleaning as these can damage the cooler.
➤ Occasionally clean the device interior and exterior with a damp cloth.
➤ Make sure that the air inlet and outlet vents on the device are free of any
dust and dirt, so that heat can be released and the device is not damaged.
EN
Cleaning and maintenance
17