Connecting To A Cigarette Lighter; Cleaning And Maintenance - Mobicool P24 DC/AC Instrucciones De Uso

_P24_P28_S25_DC-AC.book Seite 11 Dienstag, 21. April 2009 2:40 14
P24 DC/AC, P28 DC/AC, S25 DC/AC
5.3 Changing the lid
(Only on versions with the additional insulating lid feature)
As an alternative to the unit lid, you can use an insulating lid when transport-
ing the cooler.
➤ Fold the handle of the cooler forwards.
➤ Open the lid until it is vertical and then remove it by lifting it upwards.
➤ Place the insulating lid with the guide lugs into the slots on the cooler.
Note
I
Remember that the lid is only suitable for keeping cool and not for
active cooling.
5.4

Connecting to a cigarette lighter

Note
I
If you connect the device to the cigarette lighter of your vehicle, re-
member that the ignition must be turned on to supply the device
with power.
6

Cleaning and maintenance

Caution!
e
Before cleaning the cooler, pull the cable out of the socket or the
cigarette lighter.
Caution!
a
Do not clean the cooler under running water or in dishwater.
Caution!
a
Do not use abrasive cleaning agents or hard objects during clean-
ing as these can damage the cooler.
➤ Occasionally clean the device interior and exterior with a damp cloth.
Cleaning and maintenance
11