Party Light & Sound PARTY-10RGB Manual De Instrucciones página 5

EN
INSTALLING THE BATTERIES
Remove the battery cover from the back of the remote control
as shown and insert 2x AAA size batteries ensuring correct
polarity
RECOMMENDATIONS FOR BATTERIES
This symbol indicates that used batteries should not be disposed of with household waste but deposited in separate
collection points for recycling.
!
ATTENTION
Danger of explosion if battery is incorrectly placed. Only replace by the same or equivalent type.
!
WARNING
Do not swallow the battery. Danger of chemical burns. Keep new and old batteries out of the reach of children.
If the battery compartment doesn't close properly, stop using the product and keep it out of the reach of children.
If you are in doubt whether the batteries have been swallowed or introduced into any other part of the body, contact imme-
diately a doctor.
CONNECTION OF THE MICROPHONE
Connect the microphone to the MIC IN socket and switch it on.
Note: If you are playing music from any other input, connecting the microphone will not mute the sound output.
KARAOKE FUNCTION
This feature is available with any input. Play a track through AUX/USB/TF/FM/Bluetooth, connect a microphone
and sing along.
BUILT-IN REC FUNCTION
1. Plug a microphone into the MIC IN input.
2. Insert a USB/TF card into the corresponding port. Press Input selector button and select USB/TF mode.
3. If the USB/TF card is plugged into the speaker for the first time, the system will automatically create a folder
named 'record' to save the recorded files.
4. When you are ready to record, press REC button to record the sound of the wireless or wired microphone.
USB/TF OPERATION
Keep the speaker away from high temperatures, strong magnetic fields and any equipment that could generate
interference. If the speaker stops working, switch it off and on again, or unplug USB/TF card and re-plug it. The
speaker should be back to normal status.
The maximum size of USB/TF device that can be connected is 32 GB.
Supported music formats: MP3, WMA
FM RADIO FUNCTION
1. Turn on the unit and press repeatedly the input selector key on unit and select FM function (the display will
show the frequency).
2. Press the PLAY/PAUSE button on the unit or the key  on remote control to activate the auto memory (the
radio starts an automatic search for available radio stations and saves them automatically). The station's
number stored depends on the radio signal in your area. During the search, press PLAY button on the remote
control to stop searching.
3. Use the  and  keys to listen to the various radio stations saved in memory.
4. To change to a preset station, use the number keys on the remote control.
For example, to call up the station number 12, first press 1 and then 2.
BLUETOOTH OPERATION
1. Turn on the unit and press the input selector button on unit to select the Bluetooth function.
2. Activate the Bluetooth feature on the external device to be paired.
3. Initiate a search for devices. The device shows up as «PARTY».
4. Press the  to start playing and the buttons  and  for the selection of songs.
5