Idiomas disponibles
Idiomas disponibles
Attention:
Never store the machine with discharged
batteries. Otherwise, the batteries will be
damaged beyond repair.
Service, maintenance and care
The maintenance of the machine is a prerequisite for impec-
cable operation and a long service life.
Attention:
Use original TASKI parts only; otherwise,
any warranty and liability claims will ex-
pire.
Attention:
In order to rule out unintended machine
functions, before starting maintenance
works the following must always be carried
out
- the machine must be switched off,
- the key removed and
- the emergency stop confirmed.
Legend:
◊ = whenever cleaning is completed, ◊◊ = every week,
◊◊◊ = every month, ⊗ = service lamp
Activity
Loading batteries
Replenishing distilled water (wet-cell
batteries). Observe the service sheet of
the battery supplier!
Draining and cleaning the recovery and
fresh water tank
Check the intake and suction filter for
contaminations and clean them
Clean all yellow marked parts
Cleaning the tools (XP-M, front clean-
ing unit, lateral cleaning unit)
Clean the suction nozzle / squeegee,
check the blades for wear and change
them, if necessary
Clean the gasket of the tank cover,
check them for cracks and replace
them, if necessary
Cleaning the bucket
Check parking brake and emergency
stop button
Wipe the machine using a damp cloth
Maintenance and service program car-
ried out by Diversey service techni-
cians
Service intervals
TASKI machines are high-quality machines that have been
checked for safety in the factory and by authorized inspectors.
Electrical and mechanical parts are subject to wear and aging
after a longer period of use.
Service center
Please always indicate the type and number of the machine
whenever you contact us for order placing or in case of mal-
functions.
The required data are provided on the nameplate of your ma-
chine. The address of your closest TASKI service partner is
provided on the last page of these instructions of use.
Blade replacement
7
8
●
79
●
79
●
85
• Undo the four socket screws (1, 2, 3, 4).
• Separate the squeegee body from the squeegee core (5,
6).
●
• Remove the blades (7, 8).
• Clean the squeegee body and both squeegee cores under
●
running water.
• Mount the "turned" or new blades onto the squeegee core.
●
86
• Reinsert the squeegee core into the squeegee body.
• Retighten the four socket screws.
●
85
●
●
●
80
●
86
●
• In order to maintain operational safety and
readiness for use, the machine must be ser-
viced whenever the maintenance indicator
lights up (factory setting is 650 working
hours) or at least once a year.
1
2
5
6
EN
3
4
87
Capítulos
