Service Display; Batteries - diversey TASKI swingo XP-M IntelliSweep Manual De Instrucciones

1 Control panel
2 Emergency stop
3 Horn
4 Driving handles
5 Driving switch
6 Suction hose
7 Main cord for internal battery charger
8 Electronic parking brake
9 Tread with safety switch
10 Squeegee deflecting roller
11 Squeegee (yellow maintenance point)
12 Drive wheels
13 Squeegee position lock
14 Squeegee support wheel
15 Squeegee holder
16 Tool unlocking
17 Micro rotary brush (yellow maintenance point)
18 Brush unit bumper roller
19 Brush unit XP-M
20 Brushes for front cleaning
21 Brush unit for lateral cleaning
22 Brushes for lateral cleaning
23 IntelliSweep deflecting rollers
24 Bucket (yellow maintenance point)
25 Position sensor
26 Fresh water tank filter (yellow maintenance point)
27 IntelliSweep
28 Battery compartment release
29 Drain hose
30 Fresh water tank (Flextank)
31 Recovery tank
32 Pump and intake filter
33 Dirt sieve (yellow maintenance point)
34 Tank cover
35 Suction filter (yellow maintenance point)
36 Tank cover release
37 Battery display loading
38 Battery/PSU fault display

39 Service display

40 Slow approach button (ON/OFF)
41 Program button (start / stop)
42 ECO mode button (ON/OFF)
43 Recovery tank full display
44 Battery level indicator
45 Key switch
46 Display
47 Brush drive button (ON/OFF), brush pressure but-
ton (+/-)
48 Suction unit button (ON/OFF)
49 Cleaning solution supply button (ON/OFF), volume
button (+/-)
50 Spot mode button (ON/OFF)
51 Battery display loaded
78

Batteries

Permissible batteries
Traction batteries are required for the use of this machine (no
starter or device batteries). We recommend the use of pure
traction batteries. Only these batteries guarantee a long ser-
vice life.
Traction batteries are produced as open (wet-cell) batteries or
as maintenance-free (VRLA) batteries (Gel and AGM). The
machine must be adjusted according to each construction
type and manufacturer.
Each battery has a different service life and performance.
The machine must be programmed after the batteries have
been inserted or if the battery type and/or the manufacturer
have been changed as well as prior to starting the machine.
Incorrect adjustment may result in early battery failure.
Safety measures to be taken when handling the batteries
• Batteries contain acid. Always wear
safety goggles for the maintenance,
installation and removal of wet-cell
batteries.
• Rinse acid splashes in your eyes or
on your skin with plenty of clear wa-
ter.
Then immediately consult a doctor.
Wash your clothes with water.
• Explosive gas is generated during
battery charging. Keep away from
open fire or glowing embers.
• Do not smoke!
• Danger of acid burns!
• Attention! The battery poles are al-
ways energized. Therefore do not
deposit any objects on the batteries!
Attention:
Keep batteries clean and dry. Immediately
wipe off leaking acid or water (wet-cell bat-
teries).
Wear protective gloves for this purpose.
Attention:
Batteries may only be installed by service
agencies or experts approved by Di-
versey; they must be installed in compli-
ance with the connection diagram.
Installation and/or connection errors may
result in severe injury, explosion and major
damage to the machine and the environ-
ment.