Sagola DOBLE 250 Manual De Instrucciones página 31

Cleaning suction filters
Every 2 weeks, clean the suction filter present on the
suction pipe of the machine then proceed as follows:
• Unscrew the suction filter from the relative pipes.
• Fully immerse the filter (soiled with paint) in a basin
full of solvent and leave to soak for 1 hour.
• After soaking for 1 hour, use the air gun to blow the
filter.
• Screw the suction filters onto the relative pipes.
Filter replacement "Paint stop"
When the "Paitn Stop" filter does occur particularly
smeared with paint, replace it with a new filter
characteristics and similar size.
Replacement brush head
Every 4-6 months, verify the integrity of the brush
head and in case it occurs damaged and unusable,
unscrew the head and replace it with a new replace-
ment of the same type.
Drain filter regulator
The filter assembly of the pressure regulator, filter
the presence of water at supply pneumatic. Emptying
short occurs automatically whenever you off the air
supply fast grafting machine.
It is possible still force the emptying by pressing the
metal pin in place on the bottom of the filter bowl the
pressure regulator.
Not groped to unscrew or remove the glass.
- 31 -