Troubleshooting; Disposal; Technical Data - N8WERK MG419H Manual De Instrucciones

4. Clean the rest of the accessories (apart
from the motor unit (15)!) with warm wa-
ter and detergent or in the dishwasher.
5. Wipe down the motor unit with a damp
cloth if necessary.
6. Once all parts are dry, store the device
and accessories in a clean, dry place
that is out of the reach of children and
animals.

TROUBLESHOOTING

If the device does not work properly, check
whether you are able to rectify the problem
yourself. If the problem cannot be solved
with the steps below, contact the customer
service department.
Do not attempt to repair an electrical
device yourself!
The device does not work.
The mains plug is not inserted in the plug
socket correctly.
► Correct the fit of the mains plug.
The plug socket is defective.
► Try another plug socket.
There is no mains voltage.
► Check the fuse of the electrical distribu-
tor (fuse box).

TECHNICAL DATA

Article number:
Model number:
Voltage supply:
Power:
Protection class:
ID of the operating instructions: Z 09600 M N8W V1 0820 md
All rights reserved.
The device switches itself off automat-
ically.
The device is overloaded.
► Switch off the device and pull the mains
plug out of the plug socket. Allow the
device to cool down for approx. 5 –
10 minutes. Then start operating it
again.
During use, an unpleasant smell is
detected.
The device is being used for the first time.
There are production residues in / on the
device. This is normal and will not occur
again later.
► Make sure that the room is well venti-
lated!

DISPOSAL

09600
MG419H
220 – 240 V~ 50 / 60 Hz
800 W; 2000 W max. motor power
II
Dispose of the packaging material in
an environmentally friendly manner
so that it can be recycled.
This device is governed by the Euro-
pean Directive 2012/19/EU on waste
electrical and electronic equipment
(WEEE). Do not dispose of this device
as normal domestic waste, but rather
in an environmentally friendly manner
via an officially approved waste dis-
posal company.
EN
21