Kohler K-6125 Guia De Instalacion página 5

3" (7.6 cm)
or Larger
Hot
3. Install the Supplies
CAUTION: Risk of restricted waterflow and product
damage. Use extreme care to avoid kinking and twisting the
supply hoses. The supply hoses must not be taut after
installation.
NOTE: If the sink installation requires that you coil the supply hoses
to obtain a good connection, maintain an inside coil diameter of at
least 3" (7.6 cm).
Carefully position the hot and cold water supplies so they will
not interfere with other hoses or items below the mounting
surface.
Connect and tighten the supply hoses to the supply stops. Left is
hot, right is cold.
4. Installation Checkout
Verify that all connections are tight and the handles are in the
OFF position.
Turn on the main water supply.
Check all connections for leaks. Repair as needed.
Turn both handles to the ON position and allow the water to run
through the spout to remove any debris.
Turn both handles to the OFF position.
Kohler Co.
Aerator
Cold
5
Aerator
Tool
1071381-2-A