Dometic GROUP WAECO MagicSpeed MSBE7 Instrucciones De Montaje Y De Uso página 19

MagicSpeed MSBE7
Observe the following installation instructions:
 Secure the parts installed in the vehicle in such a way that they cannot become loose
under any circumstances (sudden braking, accidents) and cause injuries to the oc-
cupants of the vehicle.
 Secure any parts of the system covered by the bodywork in such a manner that they
cannot be come loose or damage other parts and cables or impair vehicle functions
(steering, pedals, etc).
 Always follow the safety instructions of the vehicle manufacturer.
Some work (e.g. on retention systems such as the AIRBAG etc.) may only be per-
formed by qualified specialists.
 To prevent damage when drilling, make sure there is sufficient space on the other side
for the drill head to come out.
 Deburr all drill holes and treat them with a rust-protection agent.
Observe the following instructions when working with electrical parts:
 When testing the voltage in electrical cables, only use a diode test lamp or a voltmeter.
Test lamps with an illuminant take up voltages which are too high and which can dam-
age the vehicle's electronic system.
 When making electrical connections, ensure that:
– they are not kinked or twisted
– they do not rub on edges
– they are not laid in sharp edged ducts without protection.
 Insulate all connections.
 Secure the cables against mechanical wear with cable binders or insulating tape,
for example to existing cables.
Please observe the following instructions in particular:
 Observe the applicable legal regulations.
 When driving, make sure no other road users can be injured.
 MagicSpeed is designed as an additional aid; i.e., it does not relieve you of the duty of
taking due care when driving.
EN
Safety and installation instructions
19