STERWINS ESH2-45.41 Instrucciones De Montaje, Utilización Y Mantenimiento página 248

FR
2. SAFETY INSTRUCTIONS
ES
SERVICE
PT
a) Have your garden power tool serviced by a qualified repair person
IT
using only identical replacement parts. This will ensure that the safety
of the garden power tool is maintained.
EL
b) If the supply cord is damaged, it must be replaced by the manufacturer
or its service agent in order to avoid a hazard.
PL
C) If the carbon brushes need to be replaced, have this done by a qualified
RU
repair person (always replace the two brushes at the same time).
UA
VIBRATION AND NOISE REDUCTION
RO
To reduce the impact of noise and vibration emission, limit the operating
EN
time, use low-vibration and low-noise operating modes, and wear
personal protective equipment.
Take the following points into account to minimise the vibration and
noise exposure risks:
1. Only use the product as intended by its design and these instructions.
2. Ensure that the product is in good condition and well maintained.
3. Use correct attachments for the product and ensure they are in good
condition.
4. Keep tight grip on the handles/grip surface.
5. Maintain this product in accordance with these instructions and keep it
well lubricated (where appropriate).
6. Plan your work schedule to spread any high vibration tool use across a
longer period of time.
Even if you are operating this product in accordance with all the
safety requirements, potential risks of injury and damage remain.
The following dangers can arise in connection with the structure and
design of this product:
248