Memory Management - DeFelsko PosiTector RTR 3D Manual De Instrucciones

Set Clock
All measurements are date and time stamped (24-hour format)
when stored into memory. It is therefore important to set the correct
date and time. Use the
the and
can also be viewed at the top of the main menu.
Battery Type
Selects the type of batteries used in the Gage from a choice of
"Alkaline", "Lithium" or "NiMH" (nickel-metal hydride rechargeable).
The battery state indicator symbol is calibrated for the selected
battery type. No damage will occur if the battery type used in the
Gage does not match the selected battery type.
The PosiTector RTR 3D has internal memory storage for recording
measurement data. Stored measurements can be reviewed on-
screen or accessed via computers, tablets and smart phones.
Measurements are date and time-stamped.
Standard models store up to 1,000 readings in one batch.
Advanced models store 250,000 readings in up to 1,000 batches.
"New Batch" closes any currently opened batch and creates a new
batch name using the lowest available number. The
appears. New batches are date stamped when they are created.
Scroll through display
modes (Advanced only)
Delete last reading
Access the Menu
Screen Capture
Press both
the current display. The last 100 screen captures are stored in
memory and can be accessed when connected to a computer
(see PosiSoft USB Drive pg. 16).
and
buttons to adjust it. The current date and time setting

Memory Management

and buttons simultaneously to save an image of
buttons to select a value, and
11
icon
Create a new batch
(Advanced only)
Restore brightness
after dimming