Declaration Of Conformity - SIOUX SZEA8000 Serie Instrucciones Y Lista De Partes

Catalog No.
SZEA8000
SZEA9000
We, Sioux Tools Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, declare under our sole responsibility that the products
to which this declaration relates are in conformity with the following standard or standards or other normative document or documents:
March 1, 2004
Murphy, North Carolina,
USA
Date and place of issues
Tools not operated at proper air pressure can operate erratically.
Do not exceed a maximum air pressure of 90 psig/6.2 bar. Use an air regulator to maintain
proper air pressure.
Erratic operation in power tools can cause injury.
Air hoses can come loose from power tools and whip.
Inspect and do not use tools with loose or damaged air hoses or fittings.
Whipping air hoses can cause injury.
When disposing of a tool, do it in a way that does not harm personnel or the environment.
Tools left connected to the air supply while making adjustments, changing accessories, or doing
any maintenance or service on tool can start unexpectedly.
Always remove tool from air supply and activate trigger to bleed air line before making any
adjustments, changing accessories, or doing any maintenance or service on tool.
Tools starting unexpectedly can cause injury.
Any unauthorized modification to the yoke, jaws or compression mechanism can weaken it
Do not modify the yoke, jaws or compression mechanism in any way.
In addition to voiding the warranty, a weakened yoke, jaws or compression mechanism can fail,
causing injury.
Cracks can occur in the yoke and compression mechanism.
Inspect the yoke and compression mechanism regularly for cracks.
A cracked yoke and compression mechanism can fail, causing injury.
Hands and fingers can contact jaws or yoke of riveter.
Keep hands and fingers away from jaws or yoke of riveter when it is operating.
Hands or fingers in contact with jaws or yoke during operation can be injured.
Check that the safety throttle lever is correctly set to insure that the tool cannot be oper-
ated inadvertently by simply pressing the throttle lever down.
SOUND AND VIBRATION READINGS
*Sound Pressure
dBA
73.4
73.4
*per PN8NTC1

DECLARATION OF CONFORMITY

SZEA8000 & SZEA9000HP Series
EN 792, EN 292 Parts 1&2, ISO 8662, Pneurop PN8NTC1
following the provisions of
89/392/EEC as amended by 91/368/EEC & 93/44/EC Directives.
Gerald E. Seebeck
Name and position of issuer
*Sound Power
dBA
85.0
85.0
*per PN8NTC1
President
Sioux Tools Inc.
2
*Vibration
m/s 2
Less than 2.5
Less than 2.5
*per ISO 8662
Signature of issuer