Declaration Of Conformity - SIOUX 4034 Serie Instrucciones

IF THE TOOL LOOSES POWER, CHECK THE FOLLOWING:
Air Pressure
Ensure that there is an adequate supply of clean, dry air at 90 psi (6.2 bars).
Sockets
Check for loose, worn, or cracked sockets.
Dirt or Debris In Tool or Water In Air Lines
Add petroleum solvent to the inlet of the tool. Run to flush dirt and debris from tool. Repeat if necessary. Lubricate air motor
immediately following flushing. Drain water form air lines.
Hose Size
Ensure that the hoses, couplers and fittings meet the criteria specified in "HOSE AND HOSE CONNECTIONS" above.
We, Sioux Tools Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, declare under our sole responsibility that the products
to which this declaration relates are in conformity with the following standard or standards or other normative document or documents:
June 1, 2003
Murphy, North Carolina, USA
Date and place of issues
SOUND AND VIBRATION READINGS
*Sound Pressure *Sound Power
Catalog No. dBA
4034 90.58
4034B 90.58
4034C 90.58
4034D 90.58
4034F 90.58
4036 90.58
4036B 90.58
4036D 90.58
*per PN8NTC1

DECLARATION OF CONFORMITY

4034, 4034B, 4034C, 4034D, 4034F, 4036, 4036B, 4036D
EN 792 (draft), EN 292 Parts 1&2, ISO 8662, Pneurop PN8NTC1
following the provisions of
89/392/EEC as amended by 91/368/EEC & 93/44/EC Directives.
Gerald E. Seebeck
President
Sioux Tools Inc.
Name and position of issuer
*Vibration
dBA m/s 2
102.23 5.02
102.23 5.02
102.23 5.02
102.23 5.02
102.23 5.02
102.23 5.02
102.23 5.02
102.23 5.02
*per PN8NTC1 *per ISO 8662
Signature of issuer
2