Cleaning & Maintenance; Before Use - NuWave PIC Gold El Manual Del Propietario

TROUBLESHOOT GUIDE
• The PIC will turn off after 45 minutes if no buttons (such as "Start"
or "Pause/Clear") are pressed. When the PIC Gold displays "0" it
will clear all previous cooking history.
• After pressing "Pause/Clear" twice or when cooking has stopped,
the fan will run up to a maximum of 60 seconds until the PIC cools.
At that point, the NuWave PIC Gold will display "0".
CLEANING & MAINTENANCE
After Removing Beep
Cookware: Sound:
< 10
Initial
seconds
< 10 seconds None
11- 70 seconds Yes
After 70 seconds None
14 14
troubleshoot guide
Display: Reference:
"F" or "C"
Return
or Sear or :
cookware to PIC
flashing.
Gold. Cooking
will automatically
"F" or "C"
resume.
or Sear or :
flashing.
If an error is
displayed,
return cookware
E1 to PIC Gold and
press Start to
automatically
resume cooking.
Cooking stops.
Choose desired
0 temperature
setting and
press "Start."
CLEANING & MAINTENANCE

BEFORE USE:

Wipe surface with a cloth soaked in warm, soapy water. Dry throughly.
IMPORTANT - Do not immerse PIC in water or attempt to cycle
through dishwasher. The outer surface may be cleaned by wiping
carefully with a damp dishcloth or sponge. Make sure PIC has cooled
completely prior to cleaning.
General Cleaning Instructions:
1. Unplug the PIC before cleaning.
2. Clean after each use.
3. Make sure the PIC has cooled completely prior to cleaning.
4. The outer surface may be cleaned by wiping carefully with a
damp dishcloth or sponge.
5. Remove the power plug prior to cleaning the NuWave PIC. Do
not use caustic cleaning agents and water should not penetrate
the interior of the induction cooktop.
6. Never immerse the PIC cables or plug in water or other liquids.
7. Wipe the glass surface with a damp cloth or use a mild, non-
abrasive soap solution. Make sure the PIC has cooled completely
before cleaning.
8. Wipe casing and operating panel with a damp soft cloth and mild
detergent.
9. Do not use oil-based cleansing products as their use may
damage plastic parts or the casing/operating panel.
10. Do not use flammable, acidic or alkaline materials or substances
near the PIC, as this may reduce the service life of the induction
cooktop or pose a fire risk when the induction cooktop is in use.
11. Ensure that the bottom of any cookware does not scrape the
PIC's glass surface, although a scratched surface will not impair
the use of the induction cooktop.
12. Properly clean the PIC before storing it in a cool, dry place.
IMPORTANT TIPS:
13.
Check power outlets to ensure proper operation. Do not use in an
outlet where other major appliances are engaged. Check settings
if the PIC is cooking too slowly.
14.
The electrical plug must be properly plugged into the outlet.
15 15
nuwavenow.com nuwavenow.com