NuWave PIC Guia De Inicio Rapido

Wattage and Amps
Wattage Setting
Power Setting
600W
Max/Sear
5 Amps
Based on line voltages registering 120V.
Changing Wattage Setting
The PIC Titanium operates at a default of
1800 watts. If you use the PIC Titanium in
a location with limited wattage, you can
adjust the PIC Titanium's wattage by
pressing until you reach the desired
Watts
wattage.
When Cooking at lower wattages,
your cooking time may increase slightly.
Changing Cooking Time
While Cooking
To cook for a specific time or longer than
1 hour. Ex: 3 hours and 45 minutes.
1. Press
twice to
Time
set column one, then
press 5 times to
set for 5 minutes.
2. Press again
Time
to set column two,
then press 4 times
to set for 4 minutes.
3. Press
again to
Time
set column three,
then press 3 times
to set for 3 hours.
The flashing digit is the number being altered.
Copyright ©2016 by NuWave, LLC. All rights reserved. www.NuWaveNow.com
Quick Start
Press
show a temperature of
900W 1,800W
and default cook for 1 hour.
15 Amps
7.5 Amps
Pause
Press
Display will clear after 45 minutes.
Resume
Press
Stop
Press
Changing Fahrenheit to Celsius
Press
Press
Press
Press
Stage/Programming Cooking
Program the PIC to cook at different
temperatures for different amounts of time.
Ex: High for 5 Min. then Low for 3 Min.
1. Press
Step 1
2. Press
5
press
3. Press
press
Step 2
4. Press
45
You can add additional stages by just repeating
steps 2 or 3 with your desired temperature and
Step 3
time before pressing
3 45
PIC
Quick Start Guide
the display will then
Start
375F/191C
once to pause cooking.
Pause
Clear
to resume cooking.
Start Start Start
twice to clear.
Pause
Clear
once.
Prog
once to display Fahrenheit.
again to display Celsius.
to finish.
Pause
Clear
to set the stages.
Prog
then press and then
High Time
5 times for 5 minutes at High.
then press and then
Low
Time
3 times for 3 minutes at Low.
to begin cooking.
Start
.
Start
Titanium
®
Adjust Cooking Temperature
Increase/decrease the temperature
manually by selecting 1 of the 6
temperature settings, or by pressing
or to adjust the temperature
by 5-degree increments.
Easy Temperature Settings
Press Range
Button Temperature
Low 100°F (38°C)
Med/Low 175°F (79°C)
Med 275°F (135°C)
Med/High 375°F (191°C)
High 425°F (218°C)
Max/Sear 575°F (302°C)
Delay Cooking
How to program the PIC to delay cooking.
Ex: Delay cooking for 6 minutes, then
cook on High for 3 minutes.
1. Press
to set the delay.
Prog
2. Press then press
Time
to delay for 6 minutes.
3. Press
then press
Prog
Press and then press
Time
times to cook for 3 minutes.
4. Press
to begin cooking.
Start
Item No. BQ 30300 Rev. 06
Examples
Warm
Simmer
Steam
Stir/Deep Fry
Boil/Saute
Sear
6 times
.
High
3