Basic Operation Instructions; Replacing Batteries In Remote Controller And Notes - Gree YAP1F Manual Del Usuario

Adjust set temperature to 30℃;
1).
Within 5 seconds, press ▼ button and then press ▲ button repeatedly for
2).
three times;
 After finishing setting, "UC" is displayed on receiver light board for 5 seconds
and "MASTER" icon is displayed on wired controller.
Switching temperature scale
(5).
In unit off status, press MODE button and ▼ button simultaneously to switch
temperature scale between ℃ and ℉.

2.4 Basic operation instructions

When the main unit is energized, press ON/OFF button on the remote
(1).
controller to turn on the unit.
Press MODE button to select the desired operation mode.
(2).
Press ▲ or ▼ button to set the desired temperature (temperature setting is
(3).
not needed in auto mode).
Press FAN button to set fan speed in auto, low, medium and high speed.
(4).

2.5 Replacing batteries in remote controller and notes

Slightly press the place with OPEN, and then push out the back cover of
(1).
remote controller along the direction of arrow (as shown in Fig 3①).
Take out the original batteries (as shown in Fig 3②).
(2).
Place two 7# (AAA 1.5V) dry batteries, and make sure the position of ＋ polar
(3).
and － polar is correct (as shown in Fig 4③).
Reinstall the cover (as shown in Fig 4④)
(4).
Notes:
When replacing the batteries, do not use old or different types of batteries,
① .
otherwise, it may cause malfunction.
When you won't use the remote controller for a long time, please take out the
② .
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
Fig.3
15
User's Manual of Remote Controller
Fig.4