6. Maintenance work
■
Only use suitable tools for all activities and be sure to contact our customer service
department to clarify how to proceed.
■
A damaged mains cable must be replaced by the manufacturer, the manufacturer's
customer service staff, or similarly qualified personnel to prevent hazards.
6.1 Functional check
The components of the Solo Sit-to-Stand Desk must be checked for correct functioning at regular intervals.
Pay particular attention to the electrical connections:
The electrical equipment for the desk must be checked at regular intervals. Fix loose connections or damaged
cables immediately. Ensure you disconnect the desk from the electrical power supply beforehand.
It is essential to observe the table "Functional Check" in the detailed user guide
(www.steelcase.com/eu-de/)!
7. Cleaning and care
Only use polishing and cleaning agents that are suitable for the respective materials (wood, plastics, metals, etc.).
Clean the desk surface regularly and if visibly soiled.
Use cleaning agents that are suitable for the respective materials to regularly clean hidden and visible
components.
8. Errors and malfunctions
EN
For the Memory control panel, some faults that could occur are indicated on the display. It is essential to observe
the table "Error Messages Memory Control Panel" in the detailed user guide!
The most important error messages in the brief overview:
HOT
ISP
CON / Err
C2 – C22
The complete error messages table including the required measures can be found in the
detailed user guide (www.steelcase.com/eu-en)
9. Service and contact details
Manufacturer
Steelcase AG
Brienner Str. 42
80333 München
Germany
158069
The overheating protection circuit has been activated.
The system has detected a collision.
The system has detected a connection error.
The control panel is locked.
See Chapter 5.3 – Control panel – lock/unlock
Err followed by error number – see "Error Messages" table
LineOne EMEA
Telephone: +49 (0) 8031 405 – 111
E-mail:
Solo Sit-to-Stand Desk
Rev. A