CARE AND MAINTENANCE
WARNING
In order to avoid personal injury and the risk of fire and electric shock, remove the battery pack before
adjusting, inspecting, or cleaning the blower.
CLEANING
• Remove the battery pack.
• Brush or blow dust and debris out of the air vents using compressed air or a vacuum. Keep
the air vents free of obstructions, sawdust, and wood chips. Do not spray, wash, or immerse the
air vents in water.
• Wipe off the housing and the plastic components using a moist, soft cloth. Do not use strong
solvents or detergents on the plastic housing or plastic components. Certain household cleaners
may cause damage, and may cause a shock hazard.
TROUBLESHOOTING
PROBLEM
Unit will not blow.
Motor fails to start
when trigger is
depressed.
Unit will not start.
POSSIBLE CAUSE
Blocked tube.
Battery is not secure.
Battery is not charged.
Defective power switch.
CORRECTIVE ACTION
Clear the blockage.
Ensure the battery is fully secure
in the battery compartment and the
battery release button locks into
place.
Charge the battery pack according
to the instructions included with your
model.
Return to place of purchase or return
the unit to a repair center or call
customer service at 1-888-3KOBALT
(1-888-356-2258).
16