Operating Instructions - Kobalt KHG 124B-03 Manual Del Usuario

OPERATING INSTRUCTIONS

WARNING
• Always use NIOSH/OSHA approved respiratory protection appropriate for the dust exposure.
Direct particles away from face and body.
• Do not use any attachments or accessories not recommended by the manufacturer of this
product. The use of attachments or accessories not recommended can result in serious
personal injury.
1. To Attach Battery Pack
WARNING
• Before attaching the battery pack make sure the
trigger switch is not depressed and the lock on/off
switch is in the center position.
a. Align the raised portion on the battery pack
with the grooves on the bottom of the tool, then
slide the battery pack onto the tool, as shown.
b. Make sure that the latches on the battery pack
snap into place and the battery pack is secured
to the tool before beginning operation.
NOTICE: When placing the battery pack on the
tool, be sure that the raised rib on the battery pack aligns with the groove on the tool and the
latches snap into place properly. Improper assembly of the battery pack can cause damage to
internal components.
To Detach Battery Pack
a. Press the battery-release buttons to release the battery pack.
b. Pull backward on the battery pack to remove it from the tool.
WARNING
• Battery tools are always in operating condition. Therefore, always remove the battery pack
when the tool is not in use or when carrying the tool at your side.
1
Battery-release buttons
9