OPERATION
• The appliance should be installed well away from sources of heat such as radiators,
boilers, direct sunlight etc.
• Ensure that air can circulate freely around the back of the cabinet. To ensure best
performance, if the appliance is positioned below an overhanging wall unit, the
minimum distance between the top of the cabinet and the wall unit must be at
least 100 mm. Ideally, however, the appliance should not be positioned below
overhanging wall units.
• Accurate leveling is ensured by one or more adjustable feet at the base of the
cabinet.
Before first Use
Before using the appliance for the first time, wash the interior and all internal accessories
with lukewarm water and some neutral soap so as to remove the typical smell of a
brand new product, then dry thoroughly.
Temperature Setting
• Plug on your appliance. The internal
temperature is controlled by a thermostat.
Depending on the model there are 6 (8)
settings. 1 is warmest setting and 5 (7) is
coldest setting and 0 is off.
• Note: The appliance may not operate
at the correct temperature if it is in a
particularly hot or if you open the door
often.
EN
29