Loading And Unloading; Removing The Bedpan Hook/Support - AT-OS AF2 P-LINE Instrucciones Operativas

Tel. ++39 045 6159411- Fax ++39 045 6159422 - e-mail: [email protected] – www.at-os.com

13.3 Loading and unloading

The machine is normally furnished with a standard support (for example on picture F page III appendix I). This support can be used
to wash most of the bedpans and urinals used in hospital wards. AT-OS S.r.l. can furnish, on request, other supports that can be
interchanged with the standard support and can be used to wash bowls, large bottles and bedpans with a wide variety of shapes.
The instructions for these supports are furnished together with the support itself.
It is good practice to always check that the containers introduced in the wash chamber are suitable for the type of support that you
have. To check this make sure that the items introduced are sufficiently firm on their support so that they remain in their housing
without changing position when the door is closed.
Each country uses its own types of container and consequently containers may have different physical characteristics. As a
consequence not all types of support may be suited for washing your containers.
The illustrations on pages 25 and 26 show a few examples of bedpan hook/supports that AT-OS S.r.l. can supply. This system of
supports permits the machine to automatically empty, wash and disinfect (thermal model only) the bedpans.
Each support has instructions regarding the specific use for which it is designed. These instructions are attached to the
documents furnished with the machine or to the support itself.
Correct positioning of the items to be processed is fundamental for achieving a correct wash.
After loading the items to be washed (as described in the instructions given with the support) the machine's wash cycle can be
started, selecting on the control panel the program that best suits the items that have been introduced into the appliance.

13.3.1 Removing the bedpan hook/support

Sometimes it may be necessary to remove the bedpan hook/support to replace it or to perform routine or extraordinary maintenance.
To remove the support just pull it towards yourself until the support connections are released from their two anchor plates. To
reinsert the support perform this operation in reverse order (see pictures F and G on page III appendix I).
Whenever a new support is inserted make sure it is correctly fastened to its connections
(Position A, picture G on page III appendix I).
AT-OS S.r.l.
Viale del Lavoro, 19 37030 Colognola ai Colli (Verona) Italy
46