Install The Sink - Kohler K-3319 Guia De Instalacion

Sealant
Clip
Wing Nut

2. Install the Sink

WARNING: Risk of personal injury. Metal surfaces are sharp
and can cause severe cuts. Use gloves and handle sink edges
carefully.
Cut out the opening by carefully following the pencil line traced
from the template.
Temporarily position the sink in the countertop opening. Verify
the fit and position.
Carefully remove the sink from the countertop opening. Return
the sink to the carton.
Install the faucet to the countertop according to the
manufacturer's instructions.
Install the sink strainer to the sink according to the
manufacturer's instructions.
Apply a continuous bead of quality sealant to the underside of
the sink rim.
Clean the countertop, and carefully position the sink in the
countertop so the Kohler logo is to the back.
Assemble a clip and wing nut to each of the threaded studs.
Carefully finger tighten each wing nut so no gap exists between
the sink rim and the countertop. Do not wrench tighten the wing
nuts.
Immediately wipe away any excess sealant, and fill any voids as
needed.
Verify that the sink has not moved out of position.
Allow the sealant to cure for at least 30 minutes before
proceeding.
1019936-2-B
Stud
Sink
4
Kohler Logo
Kohler Co.