Setting The Clock Time - Sangean RCR-10 Manual De Instrucciones

Setting the clock time

Radio-controlled clock
Your RCR-10 has three options to set up its clock time:
Radio-controlled clock, FM Radio Data System (RDS) and
Manual setting. When the unit is first plugged in, the radio will
automatically synchronize its clock time with the Radio-controlled
clock signal received while the radio is in power off mode.
1. To set up the clock time using the Radio-controlled clock function,
press and hold the Info/menu button when the unit is in power
off mode.
2. Rotate the Tuning control until a clock symbol appears on
the display. Press and release the Tuning control to enter
the setting.
3. Rotate the Tuning control until DCF77 (European version),
WWVB (US version), JJY40/60 (Japan version) or
MSF (UK version) appears on the display. Press and release the
Tuning control to confirm the setting. And the clock time of the
radio will set up automatically to the Radio-controlled clock time.
4. If the radio-controlled clock signal is being received by the radio,
the radio-controlled time icon will flash on the display at an internal
of 1 second. If the radio is not receiving any radio-controlled
clock signal, the radio-controlled time icon will flash at an interval
of 3 seconds.
5. The radio will synchronize its clock time on the hour. If the radio
time has been synchronized with radio-controlled clock time,
the radio-controlled time icon will stay on the LCD display and the
radio will keep synchronizing its clock time every odd hour on
the hour. If the radio is receiving the radio-controlled clock signal
but is not yet synchronized to the radio-controlled clock time, it will
synchronize its clock time at every hour on the hour.
25
2,3