Sangean WR-3 Instrucciones De Manejo página 11

FM Stereo/Mono mode
1. When FM signal is weak, some hiss may be audible. To reduce
the hiss, press the ST/MO button until the display shows
"Mono". Your radio will switch to mono mode.
2. To return to stereo mode press the ST/MO button
display shows "Stereo". Your radio will switch to stereo mode.
* Under the mono mode, when the frequency is changed,
it will automatically switch back to the stereo mode.
CD/MP3/SD card/USB device operation
CD operation
1. Press the CD button until "CD" shows on the display and the
unit will enter the CD mode.
2. Insert an audio CD. The display will show "loading" and then
"reading" and the CD will be played.
3. Adjust the Volume and 3D Sound switch (on the back panel) to
the required settings.
4. Play/stop/eject CD:
a. Press the PAUSE/PLAY button
Press the PAUSE/PLAY button again to resume the
CD playing.
b. To stop the CD, press the STOP button
of the CD tracks will be shown.
c. To take out the CD, either press the CD EJECT button on the
Radio, or double press the STOP button of the remote
control. The display will show "NO DISK".
until the
to pause the CD playing;
. The total number
GB
10