COZY CDV155DPPD Instrucciones De Instalación Y Funcionamiento página 18

STEP 7.
Plug main Wiring Harness (57) into the
Control Module (50).
NOTE: Plug the wiring harness into
place with the clip facing out as
illustrated here.
WARNING: Add the wiring sleeves on this step to prevent PilotPro damage during testing.
STEP 8.
Add the protective Wire Sleeves (63)
to both wires that extend from the Battery
Pack (49) and slide back the clear
insulation on both wires.
Connect the red wire from the Battery
Pack (49) and the red wire from the Wiring
Harness (57). Slide the Electrical Sleeve (63)
over the connection.
Connect the black wire
from the Battery Pack (49) to
the black wire from the Wiring
Harness (57).
Slide the Electrical Sleeve (63)
over the connection.
INSTALLATION
49
63
49
63
Page 18
57
50
57
Red
Wire
Red
Wire
57
Black
Wire
Black Wire
1019068-C